Cut List Optimizer by MakerKiln by MakerKiln

How many sheets of plywood do you need, and where does each part go? Enter your parts by length, width and how many, set your sheet size and blade kerf, and this draws a cutting layout for every sheet with the kerf taken out.

• Sheet goods in common sizes (8 x 4 ft, 5 x 5 ft Baltic birch, 10 x 4 ft, 8 x 2 ft) or your own
• Millimeters or inches
• Blade kerf and edge trim, so the last part off a cut is never short
• Grain lock for parts that must not turn
• Sheet count, yield and offcut area, with a drawn layout per sheet
• Price per sheet for the total cost

Four 48 x 24 inch shelves need two 8 x 4 sheets once a 1/8 inch kerf comes out of every cut. Make them 23 7/8 inches and all four fit on one.

Everything is calculated in your browser. Nothing you type is uploaded, and the extension asks for no permissions. It is the same optimizer as makerkiln.com/cut-list-optimizer, without the currency picker, so it never needs the network.

The "Where to get it" links are Amazon affiliate links: as an Amazon Associate, MakerKiln earns from qualifying purchases. They are labelled as such and open only when clicked.

Privacy: no data collected and no network requests. Privacy policy: https://makerkiln.com/privacy/
Support: https://makerkiln.com/contact/ hello@makerkiln.com