Volume Booster & Equalizer – Bass, Smart Mute by SuperchargeBrowser
Boost volume 600%, 10-band EQ, fix one ear, smart-mute background tabs — per site. Zero tracking.
Extension Metadata
Screenshots
About this extension
Volume too quiet, even with your system volume at maximum? Or did you open twenty tabs and now something's playing in one of them, and you just can't tell which one?
SuperchargeAudio fixes both. Boost a site's audio up to 600% without distortion, shape it with a 10-band EQ, and let smart mute handle the background noise automatically. Your settings are saved per site, so you never have to turn the volume back up every session.
VOLUME & EQ
Volume boost 0–600%
A non-linear slider gives you fine control in the 0–100% range and broad power above it. The toolbar badge shows your current level at a glance.
10-band equalizer + presets
Adjust 32 Hz through 16,000 Hz with ten independent bands. Ten ready-made presets: Flat, Bass Boost, Vocal/Voice, Treble, Loudness, Rock, Pop, Electronic, Acoustic, Small Speakers. Bass Boost preset for one-click warmth. Your EQ survives tab closes — it's still there when you come back.
STEREO, MONO, 8D & HEADPHONES
Stereo width slider
Continuous mid/side control from 0% (full mono mix) through 100% (unmodified stereo) to 200% (ultra-wide). Pull the soundstage apart or collapse it entirely — one slider.
Fix one ear
If you have uneven hearing, wear one earbud, or hit an occasional video where the audio only comes from one side: one tap merges L+R to mono and sends the full signal to both ears.
8D Audio
Slowly rotates the stereo image left↔right at ~12s per cycle. The "TikTok 8D audio" effect — fun on music with headphones.
Headphones (Bauer crossfeed)
Reduces the harsh hard-panned separation that fatigues your ears on headphones. Bleeds a low-passed copy of each channel into the other — the way the room would, if you were listening on speakers. Leave off for speakers.
PER-SITE MEMORY
Every site remembers your settings. Set 150% on a music site once and it's there next session. Turn calls down on one site and videos up on another without touching anything else. Delete a site's entry when you want it back to default, and storage stays clean.
Global default EQ
Save your current EQ curve as the default for every site that has no per-site override. Sites with a custom curve keep their own; everything else inherits the default. Flat curve with no preset clears it.
SMART MUTE & AUDIBLE TABS
Smart mute (background tabs)
Keeps audio on the tab you're focused on; mutes everything else automatically. If you switch tabs, the new active tab unmutes. Options: silent mode (mute everything, even the active tab), exclude pinned tabs, per-site always-allow whitelist, per-site always-mute blacklist.
Audible tab list
See every tab currently making sound in one list. Click to switch, click the speaker icon to mute that tab individually, drag the volume slider to set that tab's level without switching to it. Mute all with one button.
🔒 ABOUT THE PERMISSION
SuperchargeAudio asks for access to all sites the first time you tap "Turn on Protected boost" in the popup. Firefox needs that access for audio processing: the Web Audio API has to run on the page to change the sound before it reaches your speakers. We use that access only to apply your saved volume and EQ settings.
No data is collected. No data is transmitted. The extension runs entirely on your device.
Our manifest is public and auditable. SuperchargeAudio has no webRequest permission, no remote configuration URL, no third-party scripts bundled in, and no analytics host in its network requests. There is no server-side component — nothing you do in the browser is transmitted anywhere.
WORKS ON
Works with streaming video, music, podcasts and calls. When a site needs it, the popup shows "Turn on Protected boost". Tap it, allow access, and the tab reloads with your settings applied.
MORE FROM SUPERCHARGEBROWSER
SuperchargePerformance — suspends inactive tabs to free RAM, blocks ads and trackers on active tabs.
SuperchargeNavigation — Alt+K command bar, Shift+Click link preview, workspaces, Alt+Scroll tab switching.
Free to use.
SuperchargeAudio fixes both. Boost a site's audio up to 600% without distortion, shape it with a 10-band EQ, and let smart mute handle the background noise automatically. Your settings are saved per site, so you never have to turn the volume back up every session.
VOLUME & EQ
Volume boost 0–600%
A non-linear slider gives you fine control in the 0–100% range and broad power above it. The toolbar badge shows your current level at a glance.
10-band equalizer + presets
Adjust 32 Hz through 16,000 Hz with ten independent bands. Ten ready-made presets: Flat, Bass Boost, Vocal/Voice, Treble, Loudness, Rock, Pop, Electronic, Acoustic, Small Speakers. Bass Boost preset for one-click warmth. Your EQ survives tab closes — it's still there when you come back.
STEREO, MONO, 8D & HEADPHONES
Stereo width slider
Continuous mid/side control from 0% (full mono mix) through 100% (unmodified stereo) to 200% (ultra-wide). Pull the soundstage apart or collapse it entirely — one slider.
Fix one ear
If you have uneven hearing, wear one earbud, or hit an occasional video where the audio only comes from one side: one tap merges L+R to mono and sends the full signal to both ears.
8D Audio
Slowly rotates the stereo image left↔right at ~12s per cycle. The "TikTok 8D audio" effect — fun on music with headphones.
Headphones (Bauer crossfeed)
Reduces the harsh hard-panned separation that fatigues your ears on headphones. Bleeds a low-passed copy of each channel into the other — the way the room would, if you were listening on speakers. Leave off for speakers.
PER-SITE MEMORY
Every site remembers your settings. Set 150% on a music site once and it's there next session. Turn calls down on one site and videos up on another without touching anything else. Delete a site's entry when you want it back to default, and storage stays clean.
Global default EQ
Save your current EQ curve as the default for every site that has no per-site override. Sites with a custom curve keep their own; everything else inherits the default. Flat curve with no preset clears it.
SMART MUTE & AUDIBLE TABS
Smart mute (background tabs)
Keeps audio on the tab you're focused on; mutes everything else automatically. If you switch tabs, the new active tab unmutes. Options: silent mode (mute everything, even the active tab), exclude pinned tabs, per-site always-allow whitelist, per-site always-mute blacklist.
Audible tab list
See every tab currently making sound in one list. Click to switch, click the speaker icon to mute that tab individually, drag the volume slider to set that tab's level without switching to it. Mute all with one button.
🔒 ABOUT THE PERMISSION
SuperchargeAudio asks for access to all sites the first time you tap "Turn on Protected boost" in the popup. Firefox needs that access for audio processing: the Web Audio API has to run on the page to change the sound before it reaches your speakers. We use that access only to apply your saved volume and EQ settings.
No data is collected. No data is transmitted. The extension runs entirely on your device.
Our manifest is public and auditable. SuperchargeAudio has no webRequest permission, no remote configuration URL, no third-party scripts bundled in, and no analytics host in its network requests. There is no server-side component — nothing you do in the browser is transmitted anywhere.
WORKS ON
Works with streaming video, music, podcasts and calls. When a site needs it, the popup shows "Turn on Protected boost". Tap it, allow access, and the tab reloads with your settings applied.
MORE FROM SUPERCHARGEBROWSER
SuperchargePerformance — suspends inactive tabs to free RAM, blocks ads and trackers on active tabs.
SuperchargeNavigation — Alt+K command bar, Shift+Click link preview, workspaces, Alt+Scroll tab switching.
Free to use.
Rated 0 by 0 reviewers
Permissions and data
Required permissions:
- Access browser tabs
Optional permissions:
- Access your data for all websites
Data collection:
- The developer says this extension doesn't require data collection.
Optional data collection, according to the developer:
- Browsing activity
- Technical and interaction data
More information
- Add-on Links
- Version
- 1.1.3
- Size
- 327.2 KB
- Last updated
- 9 days ago (Nov 10, 2026)
- Related Categories
- License
- All Rights Reserved
- Privacy Policy
- Read the privacy policy for this add-on
- Version History
- Add to collection